Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

RS232 comunication

Created by: mapons at: 12/30/2011 12:32 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/30/2011 12:32 PM	Rate (0)
mapons Posts: 7 Rating: (0)	Hello, we have a modbus /uss module for ET200 6ES7 138-4DF11-0AB0 but we want to do a comunication betwen PLC and RS232 device (ascii protocol) Is mandatory to use a 6ES7 138-4DF01-0AB0 ascci module? Is it possible convert a 6ES7 138-4DF11-0AB0 into a 6ES7 138-4DF01-0AB0 (for example with a firmware upgrade)?
mapons Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

12/30/2011 1:34 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	Hello, No, it is not possible to 'convert' both modules. best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on