Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

RT License Problem

Created by: yechu at: 5/18/2009 1:04 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/18/2009 1:04 PM	Rate (0)
yechu Posts: 29 Rating: (1)	Hi guys, I done one project for our customer last year. I am use Wincc V6.0 RT256. Last Year, I License corrupted error occur, then i bought a new license and given to the customer. Now, 3rd time, I am facing thesame problem in same Project. What is the solution for these type of problems? Pls reply me. By, Yechu
yechu Posts: 29 Rating: (1)
Suggestion To thank Quote Answer

5/18/2009 2:20 PM	Rate (0)
daga Gold Member Joined: 3/18/2009 Last visit: 12/6/2024 Posts: 306 Rating: (94)	Hello yechu, If your license is corrupted, then you can contact Siemens Technical support in your country or on the numbers provided on the "yellow floppy disk" Generally, they will ask you the reason for license corruption, serial numbers etc. and will replace the floppy disk with a new license. It is pretty fast. You do not have to buy a new license. regards.

Suggestion To thank Quote Answer

5/19/2009 9:12 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/10/2024 Posts: 8781 Rating: (1172)	Dear yechu, Perhaps this link, might help you to find reason of losing license: http://support.automation.siemens.com/WW/view/en/23174341 Best regards, Wizard
	Last edited by: Wizard at: 5/19/2009 9:14 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on