Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ruler of Faceplate Trendview with Standard library

Created by: tomorrow at: 5/16/2012 10:16 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/16/2012 10:16 AM	Rate (0)
tomorrow Advanced Member Joined: 4/20/2010 Last visit: 12/16/2024 Posts: 38 Rating: (4)	Hi, I'm not so familar with standard library.... in V7.1 SP3 I'm using the standard library and if I open the faceplate and switch to the trendview and then activate the ruler, I only see a title and have to enlarge that ruler window to be able to watch the value... in the Faceplate configuration is no possibility to change settings for that ruler, only if I take a wincc trendcontrol, their I have the possibility to change some ruler settings and it works... but I can not put a WinCCTrendcontrol into a Faceplate.... can anyone help me to have that fixed? great thanks....

Suggestion To thank Quote Answer

5/17/2012 2:04 AM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	The trends for standard library icon faceplates use @conl1_standard.pdl. Check "Programming Instructions for Blocks" manual for details.
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on