Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Run V90 PN without PLC

Created by: bercow at: 2/27/2023 9:39 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/27/2023 9:39 AM	Rate (0)
bercow Member Joined: 7/10/2016 Last visit: 12/29/2024 Posts: 11 Rating: (0)	Hello. I have V90 (6SL3210-5FE10-4UF0) in Profinet version. Its possible to run this drive without PLC using only DI/DO from V90 ? Simple move (left, 2000rpm START/STOP). https://mall.industry.siemens.com/mall/pl/pl/Catalog/Product/6SL3210-5FE10-4UF0

Suggestion To thank Quote Answer

2/28/2023 4:13 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 1/15/2025 Posts: 5984 Rating: (823)	Dear bercow, No, it is not possible. the only chance I see is using a small S71200 CPU and control the drive with Sinaspeed. SINAMICS communication blocks DriveLib for reading and writing drive data within TIA Portal Context
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

12/21/2023 12:23 PM	Rate (0)
Ziemens Silver Member Joined: 3/2/2007 Last visit: 1/10/2025 Posts: 966 Rating: (5)	""" Its possible to run this drive without PLC using only DI/DO from V90 ? Simple move (left, 2000rpm START/STOP). """ wish we have this feature, it will facilitate the running . . .
	... thank you ...
Suggestion To thank Quote Answer

12/29/2023 2:54 PM	Rate (0)
Martin472 Bronze Member Joined: 4/28/2009 Last visit: 9/16/2024 Posts: 347 Rating: (44)	Hello, I'm affraid, digital inputs has no function to start the motor. According manual, you have following possibilities for DI: 0: Not Assigned 2: Reset fault 3: ClockWise Limit (axis limit switch) 4: ContraClockWise Limit 11: Torque Limiting 20: Speed Limiting 24: Referencing 29: Emergency Stop There is possible to start the Profinet version of V90 drive only from PLC via telegram. With regards Martin
	Last edited by: Martin472 at: 12/29/2023 14:54:44 Last edited by: Martin472 at: 12/29/2023 14:55:00
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on