Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

runtime plc notgetting data from plc

Created by: timbroeckx12 at: 4/20/2023 11:32 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

4/20/2023 11:32 AM	Rate (0)
timbroeckx12 Joined: 12/23/2022 Last visit: 4/21/2023 Posts: 2 Rating: (0)	I heva a windows server 2022 running with wincc unified pc runtime v18. connecting to a cpu 1516-3 and if I login on the webbrowser and look at my page it shows grayed out boxes. in the alarm page I get the following error. Connection to the HMI device @5%s@ is lost. how do i fix this?

Suggestion To thank Quote Answer

4/20/2023 11:41 AM	Rate (0)
gvatte Advanced Member Joined: 1/24/2021 Last visit: 9/20/2023 Posts: 99 Rating: (13)	Hello Tim! it means you dont have a connection between the HMI and the PLC. Br
	Please feel free to rate my contribution if it was helpfull :)
Suggestion To thank Quote Answer

4/20/2023 11:44 AM	Rate (0)
timbroeckx12 Joined: 12/23/2022 Last visit: 4/21/2023 Posts: 2 Rating: (0)	I can ping the plc from the pc

Suggestion To thank Quote Answer

4/20/2023 11:53 AM	Rate (0)
gvatte Advanced Member Joined: 1/24/2021 Last visit: 9/20/2023 Posts: 99 Rating: (13)	Rebuild and download HMI perhaps? Br
	Please feel free to rate my contribution if it was helpfull :)
Suggestion To thank Quote Answer

8/25/2023 8:09 AM	Rate (0)
jumo Bronze Member Joined: 11/16/2012 Last visit: 9/11/2023 Posts: 227 Rating: (29)	Hello, can you tell me what was the solution for this issue? I have the same message Thanks!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on