Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

runtime problem !!

Created by: ahmedmae94 at: 3/27/2009 10:59 AM (3 Replies)

Rating (1)

Thanks 0

4 Entries

3/27/2009 10:59 AM	Rate (0)
ahmedmae94 Posts: 103 Rating: (11)	hello every body , I installed winccflexible 2008, I made new project. during wizard , I chose PC station (as device) . my problem is when I design any scada page , and make run time simulation, the simulation page doesn't occupy the whole screen of my PC. for more description see the picture in the attachment . thank you. Attachment New Bitmap Image.zip (39 Downloads)
ahmedmae94 Posts: 103 Rating: (11)
Suggestion To thank Quote Answer

3/27/2009 11:15 AM	Rate (1)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/31/2023 Posts: 8586 Rating: (1122)	Dear ahmedmae94, Please go to 'Device settings' -> device settings and change 'Screen Resolution' Best regards, Wizard

Suggestion To thank Quote Answer

3/27/2009 12:31 PM	Rate (0)
ahmedmae94 Posts: 103 Rating: (11)	I try your suggestion , I succeeded thank you alot
ahmedmae94 Posts: 103 Rating: (11)
Suggestion To thank Quote Answer

3/27/2009 2:25 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/31/2023 Posts: 8586 Rating: (1122)	You are welcome Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on