Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Runtime Simulator KTP400 Basic with real CPU1214C

Created by: Dilli at: 2/2/2010 9:28 AM (3 Replies)

Rating (2)

Thanks 1

4 Entries

2/2/2010 9:28 AM	Rate (1)
Dilli Posts: 122 Rating: (1)	Hi! I'm new in S7-1200. I've writen a small program in Step 7 Basic for CPU 1214C, and one for basic panel KTP400. I've download program to CPU, but don't have the panel, can I simulate work of panel on PC ?
Dilli Posts: 122 Rating: (1)	Last edited by: Dilli at: 2/2/2010 9:29 AM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

2/2/2010 9:56 AM	Rate (1)
Robster Gold Expert Joined: 5/28/2008 Last visit: 10/23/2024 Posts: 1343 Rating: (141)	Of course it is possible. Searching helps http://support.automation.siemens.com/WW/view/en/38717202 HMI simulation s7-1200 regards

Suggestion To thank Quote Answer

2/2/2010 10:42 AM	Rate (0)
Dilli Posts: 122 Rating: (1)	Robster Of course it is possible. Searching helps http://support.automation.siemens.com/WW/view/en/38717202 HMI simulation s7-1200 regards good work - thanks a lot, [schnippschnapp]
Dilli Posts: 122 Rating: (1)	Last edited by: O_Moderator at: 2/2/2010 11:03 AM new question is in thread /tf/WW/en/Posts/39712#top
Suggestion To thank Quote Answer

2/10/2016 3:26 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by stanislav_matys is split to a separate thread with the subject TIA V13, cant see values on the simulated screen. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on