Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Russian text when using K(russian) logo td displays +/-

Created by: GATTL at: 11/23/2010 12:26 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/23/2010 12:26 PM	Rate (0)
GATTL Posts: 10 Rating: (0)	When we input Russian K into text using cyrilicit displays as +/-odegrees on the Display anyone have the same problem? Thankyou in advance
GATTL Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

11/24/2010 9:44 AM	Rate (0)
Andres [Str] Posts: 153 Rating: (17)	Hi,GATTL LOGO 0ba6 series can display the Russian text . Example here: https://www.automation.siemens.com/tf/WW/en/Posts/25466#top
Andres [Str] Posts: 153 Rating: (17)	Last edited by: Andrey [Str] at: 11/24/2010 9:44 AM
Suggestion To thank Quote Answer

11/24/2010 2:43 PM	Rate (0)
GATTL Posts: 10 Rating: (0)	Hi Thanks for the reply, we've mastered getting the Russian text on the display, its just some of the characters display OK on simulation in the computer but not correctly on the TD display. Its as if the character output from the software in the LOGO is being mis-read by the display and shows another character instead. Wondered if anyone else has had the same problem?
GATTL Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on