Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S110 CU305DP accessible nodes problem

Created by: TankMohit11 at: 9/23/2016 11:18 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

9/23/2016 11:18 AM	Rate (0)
TankMohit11 Posts: 4 Rating: (0)	I have sinamics cu 305dp module for s110. i want to upload drive parameters to my pc,i connect my cu 305dp with pc using PC adapter and setting pg pc settings to s7online -> PC adapter MPI . and then i search for accessible nodes. it can find c305dp but i can not select them. i have checked for support packages for s110 and they are installed. i dont have any cf card inserted in that unit. Attachment Capture1.PNG (46 Downloads)
TankMohit11 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

9/23/2016 11:20 AM	Rate (0)
TankMohit11 Posts: 4 Rating: (0)	Here is second screenshot Attachment Capture.PNG (37 Downloads)
TankMohit11 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

9/23/2016 11:28 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/3/2023 Posts: 21220 Rating: (2798)	Hello, you have not installed the SSP fpr S110 V4.3. Update the FW on the CU305 to V4.4 or install the SSP S110 V4.3 Which Starter do you use? Regards Christoph

Suggestion To thank Quote Answer

9/24/2016 9:20 AM	Rate (0)
TankMohit11 Posts: 4 Rating: (0)	What is the procedure for that?
TankMohit11 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

9/24/2016 5:05 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/3/2023 Posts: 21220 Rating: (2798)	for what exactly?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on