Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S110 fault F07995

Created by: BlancoAutomacao at: 7/28/2017 1:36 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/28/2017 1:36 PM	Rate (0)
BlancoAutomacao Regular Member Joined: 5/11/2016 Last visit: 9/5/2022 Posts: 18 Rating: (0)	Good Morning I have a system with: SINAMICS S110, 6SL3040-0JA01-0AA0 PLC S7-1200 When I enable the control panel the following fault appears. F07995 - Disable p1982 = 0 the following fault appears. F07551. Can someone help me? Attachment Capturar.PNG (80 Downloads)
	Last edited by: Gauchoxx at: 7/28/2017 1:37:26 PM Blanco Automação
Suggestion To thank Quote Answer

7/28/2017 1:38 PM	Rate (0)
BlancoAutomacao Regular Member Joined: 5/11/2016 Last visit: 9/5/2022 Posts: 18 Rating: (0)	P1982 =0 Attachment Capturar1.PNG (52 Downloads)
	Blanco Automação
Suggestion To thank Quote Answer

7/31/2017 11:11 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 10/11/2024 Posts: 5911 Rating: (809)	Hello, check the online help for remedy. Further Info: 4.13 Pole position identification https://support.industry.siemens.com/cs/ww/en/view/109740020
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on