Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S110 +S7-1500 problems...

Created by: SAR-CNT at: 8/19/2018 5:22 PM (11 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

8/19/2018 5:22 PM	Rate (0)
SAR-CNT Silver Member Joined: 1/23/2013 Last visit: 8/10/2022 Posts: 226 Rating: (5)	Hello S110 CU305PN Motor 1FK7083-2AC71-1RA0 S7-1500 1511 telegram 3 I manage the position via S7-1500 but there is no correspondence between the displacement length the size of the axis is 8 times different ... the encoder values entered according to the Starter data// AM22DQI Absolute encoder, 22 bit + 12 bit multi-turn. p1 Attachment Siemens.Automation.Portal_2018-08-19_18-12-22.png (80 Downloads)
	Last edited by: SAR-CNT at: 8/19/2018 7:40:45 PM Last edited by: SAR-CNT at: 8/19/2018 7:43:20 PM
Suggestion To thank Quote Answer

8/19/2018 5:27 PM	Rate (0)
SAR-CNT Silver Member Joined: 1/23/2013 Last visit: 8/10/2022 Posts: 226 Rating: (5)	Starter p2 Attachment u7wdrfax_2018-08-19_18-09-36.png (56 Downloads)

Suggestion To thank Quote Answer

8/19/2018 5:44 PM	Rate (0)
SAR-CNT Silver Member Joined: 1/23/2013 Last visit: 8/10/2022 Posts: 226 Rating: (5)	Starter p3 Attachment u7wdrfax_2018-08-19_18-42-39.png (54 Downloads)

Suggestion To thank Quote Answer

8/20/2018 7:04 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/2/2024 Posts: 22388 Rating: (3015)	Hello, in the first screen set the checkbox "automatic Dataexchange for encoder value" the the encoder configuration is read from the drive. The configuration in the Screen is not correct. Regards Christoph

Suggestion To thank Quote Answer

8/20/2018 8:30 AM	Rate (0)
SAR-CNT Silver Member Joined: 1/23/2013 Last visit: 8/10/2022 Posts: 226 Rating: (5)	ChristophD Hello, in the first screen set the checkbox "automatic Dataexchange for encoder value" the the encoder configuration is read from the drive. The configuration in the Screen is not correct. Regards Christoph Hello, ChristophD I refused it. at the first start I installed this checkbox (automatic data reading) but I started to jerk the engine in different directions while moving ... and I refused it
	Last edited by: SAR-CNT at: 8/20/2018 8:32:11 AM
Suggestion To thank Quote Answer

8/20/2018 8:52 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/2/2024 Posts: 22388 Rating: (3015)	Hello, please try the following settings: Icrements per revolution = p979[2]= 512 Number of revolution = p979[5]= 4096 Regards Christoph

Suggestion To thank Quote Answer

8/20/2018 9:02 AM	Rate (0)
SAR-CNT Silver Member Joined: 1/23/2013 Last visit: 8/10/2022 Posts: 226 Rating: (5)	ChristophD Hello, please try the following settings: Icrements per revolution = p979[2]= 512 Number of revolution = p979[5]= 4096 Regards Christoph ok ChristophD Increment per revolution: 512 Number of resolution: 4096 Encoder type: Absolute or cyclic absolute???

Suggestion To thank Quote Answer

8/20/2018 9:15 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/2/2024 Posts: 22388 Rating: (3015)	Hello, cyclic absolute. Regards Christoph

Suggestion To thank Quote Answer

8/20/2018 10:10 AM	Rate (0)
SAR-CNT Silver Member Joined: 1/23/2013 Last visit: 8/10/2022 Posts: 226 Rating: (5)	ok what additional options it is possible to set in "S110" via the Starter when controlling via "TO S7-1500" maybe I missed something ...

Suggestion To thank Quote Answer

8/20/2018 10:26 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/2/2024 Posts: 22388 Rating: (3015)	SAR-CNT ok what additional options it is possible to set in "S110" via the Starter when controlling via "TO S7-1500" maybe I missed something ... what do you mean?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on