Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S110 v4.4.3 GSD file

Created by: Arzu07 at: 7/16/2016 3:50 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/16/2016 3:50 PM	Rate (0)
Arzu07 Advanced Member Joined: 5/16/2016 Last visit: 11/14/2023 Posts: 6 Rating: (0)	Which GSD file is required for S110 V4.4.3???? Very urgent need... I have stuck on a project. how to run a S110 PN in only degital input/ output??? Please help.......

Suggestion To thank Quote Answer

7/18/2016 6:40 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/11/2024 Posts: 22410 Rating: (3017)	Hello, you need the V4.4 GSD File. https://support.industry.siemens.com/cs/ww/en/view/42705323 Regards Christoph

Suggestion To thank Quote Answer

7/19/2016 6:44 AM	Rate (0)
Arzu07 Advanced Member Joined: 5/16/2016 Last visit: 11/14/2023 Posts: 6 Rating: (0)	Thanks for replay. You have given me the link for PROFIBUS GSD. But i need PN GSD files. I used the GSD from following link... https://support.industry.siemens.com/cs/document/48924746/sinamics-s110%3A-profinet-gsdml-file?dti=0&lc=en-WW There has no other GSD for PN in SIEMENS site. But when i define any of these on PLC to connect S110 v4.4.3 then PLC show minority error and do not communicate with DRIVE. With these GSD i have successfully communicate with S110 v4.4 drives. So i think there should have other GSD for s110 v4.4.3. I still can not communicate with Drive. Can anyone give me any clue????

Suggestion To thank Quote Answer

7/19/2016 7:01 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/11/2024 Posts: 22410 Rating: (3017)	Hi, sorry but then you should say in the first post which field Bus system you use. The V4.4 PROFINET GSD should also working for the Version V4.4.3, the PROFINET GSDML from you link is the same which is stored in the FW Archve of the S110 V4.4.3 (GSDML_V2.3 and GSDML V2.25). Which GSDML you installed exactly (ther are 3 differnt GSDML Files available) A newer GSDML ist not available and not need! Regards Christoph

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on