Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S120 Cu 310 2 Pn Fault 7414

Created by: AutoGen_8887007 at: 12/16/2019 4:39 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

12/16/2019 4:39 PM	Rate (0)
AutoGen_8887007 Member Joined: 9/27/2019 Last visit: 1/12/2023 Posts: 3 Rating: (0)	Good day. I have a problem putting the sensor into operation. I am using the heidenhain endat 512 encoder that is connected to the smc20 module ALE STARTER is writing error 7414 Changed sensor serial number. Anyone know how to fix this error? Thank you for your answers
	Last edited by: AutoGen_8887007 at: 12/16/2019 16:41:57
Suggestion To thank Quote Answer

12/17/2019 6:09 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/27/2023 Posts: 21197 Rating: (2797)	Hi, try to set p440=1 or P441=ff P442=0 P443=0 P444=0 P445=0 Regards Christoph
	Last edited by: ChristophD at: 12/17/2019 07:11:44
Suggestion To thank Quote Answer

12/17/2019 7:08 AM	Rate (0)
AutoGen_8887007 Member Joined: 9/27/2019 Last visit: 1/12/2023 Posts: 3 Rating: (0)	P241 - access level 4 P242 - access level 4 .....

Suggestion To thank Quote Answer

12/17/2019 7:13 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/27/2023 Posts: 21197 Rating: (2797)	for what you want the parameters 24x? 440 have level3, can you try it?

Suggestion To thank Quote Answer

12/17/2019 8:39 AM	Rate (0)
AutoGen_8887007 Member Joined: 9/27/2019 Last visit: 1/12/2023 Posts: 3 Rating: (0)	Sorry i think param p441, p442... Is access level 4

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on