Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S120 SInamics Inverter "Control Word & Status word" configuration

Created by: ENGR NAZIM GHAFFAR at: 11/9/2013 10:36 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/9/2013 10:36 AM	Rate (0)
ENGR NAZIM GHAFFAR Posts: 19 Rating: (0)	Dear All, I am configuring Sinamics S120 Inverter, can you please guide me how to configure control word and status word in inverter side ??? It will be much effective if you could provide me some snapshots, or steps to performfor this activity...
ENGR NAZIM GHAFFAR Posts: 19 Rating: (0)	Last edited by: O_Moderator at: 11/10/2013 1:33 PM contact data deleted
Suggestion To thank Quote Answer

11/10/2013 12:45 PM	Rate (0)
zako_ Gold Member Joined: 5/22/2012 Last visit: 3/24/2022 Posts: 895 Rating: (65)	this depends on your telegramm. For example you use telegramm1 (speed axis). Sou would send in Wort 1 047E (HEX) to be in the status "31 - ready to switch on" and then you send 047F (HEX), so the drive would be in operation. In Wort 2 you would send 4000HEX to run the motor with 100% of speed (100% in relation to reference speed - drive parameter p2000)! Regards Zako

Suggestion To thank Quote Answer

8/28/2014 8:18 AM	Rate (0)
azzy9 Posts: 93 Rating: (0)	Can You explain little more? in steps? i have Control Word 1 = 9c7cH defined in master drive VC, what if i have to use same value in Sinamics s120..? what parameters i need to set? Please im new to all this, HELP!!
azzy9 Posts: 93 Rating: (0)
Suggestion To thank Quote Answer

8/28/2014 4:54 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 6/5/2023 Posts: 5529 Rating: (744)	Hello, You can take a look in an applicatio example : http://support.automation.siemens.com/WW/view/de/68585847
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on