Navigation

S120

Created by: hamid rad at: 9/15/2014 10:11 AM (1 Replies)

9/15/2014 10:11 AM	Rate (0)
hamid rad Posts: 41 Rating: (8)	hi there I have a CU S120 and also 2 momo. I going to these both to the one cu. setpoint of second momo is torque of first momo. haw can i transfer this setponit through the cu.
hamid rad Posts: 41 Rating: (8)
Suggestion To thank

9/15/2014 10:48 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4767 Rating: (123)	Closed cause question posted twice. The second thread S120is published within the conference SINAMICS. Best regards Min_Moderator

Suggestion To thank

Share this page:

Share this page on...