Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S5 115U 945 communicate with TD17 program

Created by: AutoGen_262522 at: 10/19/2013 4:23 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

10/19/2013 4:23 PM	Rate (0)
AutoGen_262522 Posts: 3 Rating: (0)	hello friends, i have a old program. The cpu communicate with td 17 with SI 2 FAP. The interface area of TD 17 is connected with DB51 in S5 program. I want to konw what information in DB51. if i will connect a new TD17,how to set up DB51? thank you,
AutoGen_262522 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

10/19/2013 8:33 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (707)	Hello, I think that DB was created to keep the tags for the TD in one place. You don''t have to change this DB when replacing the TD, all you need to do is download the HMI program in the TD and it should work like before. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

10/20/2013 3:30 AM	Rate (0)
AutoGen_262522 Posts: 3 Rating: (0)	hi Marcjan, thank you for your replay. I want to do new project with S5and TD 17.But I don'tunderstand the what information and function in DB51. I will do newone and how to set up theDB51. than you,
AutoGen_262522 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

10/21/2013 10:27 AM	Rate (0)
BeVee Gold Member Joined: 7/18/2011 Last visit: 6/9/2023 Posts: 521 Rating: (88)	Hello Autogen_262522 You can find all information regarding interface area in this manual. Kind regards, BV

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Marcjan

|

Share this page:

Share this page on...

Follow us on