Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S5 Com Fault

Created by: JamesB at: 2/16/2011 3:39 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/16/2011 3:39 PM	Rate (0)
JamesB Posts: 14 Rating: (0)	I have an S115U processor in the plant running S5. I need to save this program.Currently, were we to lose this program we have no backup. I can get online with the processor but when I try to save the program I get the fault displayed in my attachement. Ihave been toldby a local Siemens rep that this could indicate that a bit has been set in theprogram to prevent anyone from downloading. Also, in the processor is an EPROM.So, itis possible that the CPU could be reading the program from this EPROM.I don't know that this information matters but I want the audience to get the full picture.Has anyone experienced this problem? Thoughts....ideas? Attachment SH200.JPG (46 Downloads)
JamesB Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

2/17/2011 5:54 PM	Rate (0)
Ben Rad Bronze Member Joined: 7/28/2010 Last visit: 4/25/2023 Posts: 184 Rating: (11)	Hi James, Take a look at the following link. http://support.automation.siemens.com/WW/view/en/762567 Regards, Behnam www.sigmaprocess.ca

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on