Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S5 Graph5/II

Created by: bartvandamme at: 6/22/2009 3:56 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/22/2009 3:56 PM	Rate (0)
bartvandamme Posts: 1 Rating: (0)	Hello, I have a problem with a machine with a S5-95U. the step5 program seems to run, exept for 2 pieces of GRAPHSET. The program uses FB72 to call SB10 and SB30. Everytihng exept SB10 and SB30 are running. I found in the manual for GRAPH5/II that you need SB2 together with FB72, but SB2 is not in the software. Is there a way to get this SB2? or is there anything else needed for graphset to run? thanks.
bartvandamme Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

6/25/2009 4:27 AM	Rate (0)
fritz Diamond Expert Joined: 10/7/2005 Last visit: 12/20/2024 Posts: 3029 Rating: (1058)	Hello bartvandamme please check what Graph 5 version your are using,and have a look at chapter 9.2 of thisS5-90U/S5-95U Programmable Controller System Manualfor more on "where and how" SB2 is used in a 95U. Additonally, this FAQ may also help. Cheers Fritz
	Cheers fritz The advice and opinion given in this thread is that of the author and does not necessarily reflect the views of I S Systems Pty Limited. To find out how I S Systems can help you with your automation needs please visit www.issystems.com.au.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on