S5 to S7 .ACS

Hi all,

I never convert a S5 file before, and looking for solutions I find the S5 converting. After open this software I saw that my file is an .ACS. I don't know if it's a false file (like bkp files) or is a diferent format for S5 project.

How can I open it?

Hello,

look below what you have:

Archiving-/ Dearchivingtool for STEP 5 V7.x projekt files - ID: 1160072 ...

No have xxxxxxST.S5D?

Gustavo Dias

I tried use this .exe and don't work. I have not .S5D file, only .ACS

 Hello,

follow our Expert Fritz if function:

Opening a file - Entries - Forum - Industry Support - Siemens

Work!! I have some errors in conversion, I will try to learn about it and open in S7. Thank's guys

Another help,

I convert and open the .awl file, I can see the list but I don´t know how to change it by FC.

Gustavo Dias

Another help,

I convert and open the .awl file, I can see the list but I don´t know how to change it by FC.

 

 Hello,

 click below on the Blocks .... You have nothing?

 Or Double click on your Source File then press Compile button then go to Blocks folder

 or open the thread below and follow last post of our Expert Marcjan (pdf)

 https://support.industry.siemens.com/tf/WW/en/posts/how-to-update-awl-file-in-step-7-program/121259?page=0&pageSize=10

Ste39

 Hello,

 click below on the Blocks .... You have nothing?

 Or Double click on your Source File then press Compile button then go to Blocks folder

 or open the thread below and follow last post of our Expert Marcjan (pdf)

 https://support.industry.siemens.com/tf/WW/en/posts/how-to-update-awl-file-in-step-7-program/121259?page=0&pageSize=10

 So, this occurs with .AWL file with more than one FB? If my .awl has a lot of FB's and FC's, etc, all this will appear?