Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S5 to S7 Conversion Issue

Created by: Tala at: 5/5/2011 6:55 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/5/2011 6:55 PM	Rate (0)
Tala Posts: 20 Rating: (0)	Thisis a part of converted program. The issue is that TNB instruction in S5 is converted into SFC20 andI want to know that what should I write for this P#????? BYTE 1, I am not getting wether I have to create some pointer orI can use the ACCU1 directly here?? NETWORK OPN #UBDB ; A #RFLM; JC M001; L #PADR; T DBW 2; L W#16#1; OW; L W#16#EEFF; CALL SFC 20 ( SRCBLK:= P#????? BYTE 1 , RET_VAL:= conv_ret_val, DSTBLK:= P#????? BYTE 1 ); * Error in Line 1670 (FB 203): CALL SFC20 generated. Please complete parameter list. *
Tala Posts: 20 Rating: (0)
Suggestion To thank

5/6/2011 11:23 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 5/24/2023 Posts: 4099 Rating: (192)	closed cause question posted twice. The second thread with the subject SFC20 Parameters are requiredis published within the conference STEP 7 / STEP 7 Lite. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on