Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-1200 ANALOG

Created by: Chili at: 10/25/2012 10:51 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/25/2012 10:51 AM	Rate (0)
Chili Posts: 23 Rating: (0)	Hi All. I need urgent assistance please. I am busy with a project and I’m using the S71214C. I am also using 6ES7231-4HF30 (8x Analog Input Module). The problem I have is : I am trying to inject a 0-20mA source into the analog input card, but I am unable to see the correct range of the Analog input word. I have wired up my source according to the diagram supplied by Siemens. Thanx. Attachment D:\S7-1200 PDF'S\WIRING ANALOG CARD ON S7-1200\How do you connect a sensor to the analog SM S7 12 (2).pdf (293 Downloads)
Chili Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

10/25/2012 10:59 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/24/2025 Posts: 8808 Rating: (1177)	Hello Chili, Have you seen these threads: /tf/WW/en/Posts/36330 /tf/WW/en/Posts/31698#top What values do you read in? Best regards, Wizard

Suggestion To thank Quote Answer

10/25/2012 11:02 AM	Rate (0)
Mc Muffin Posts: 495 Rating: (58)	Have a look on the document below. Maybe it helps. https://www.automation.siemens.com/mcms/sce/de/fortbildungen/ausbildungsunterlagen/download_ausbildungsunterlagen/m_simatic_s71200_sps/Documents/EN_M05_S7-1200_analog.pdf
Mc Muffin Posts: 495 Rating: (58)
Suggestion To thank Quote Answer

10/25/2012 11:22 AM	Rate (0)
Chili Posts: 23 Rating: (0)	i will try that guys....i will give you a feedback......
Chili Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on