S7-1200 and G120C DP using USS protocol

Hi,

I have  Micromaster communication with S7-1200 in USS protocol. Company is switching Micromaster to Sinamics G120C DP, and my task is to configure it so Sinamics communicates same way as MM previously.

I would like to do it as simple as possible - just configuring telegram on sinamics so it corresponds to previous one. No code changes etc. Thing is, i cannot find any useful manuals/tutorials for G120C specifically. What I found is that I could change p2030 parameter to 1 - USS, but only options I have is no protocol or profibus. Doesn't sinamics G120C DP have USS telegram to configure? If it has, could You provide me some manuals/etc how to configure it? I'm configuring it through Sinamics Starter.

Used hardware information:
Micromaster - 6SE6420-2AD22-2BA1
Sinamics - 6SL3210-1KE18-8AP1
PLC - 6ES7 214-1AE30-0XB0

Thank You!

Please check SINAMICS G120C converter, especially page page 22 USS address & bus termination, page 24 factory setting of terminals, page 26 &  page 27 default setting 21, p2016,  p2022 - PZD number, p2023 - PKW numbers, p2030 - protocol selection etc. etc.

HTH