Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

s7 1200 conversion

Created by: Rajesh_s at: 8/22/2012 12:14 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/22/2012 12:14 PM	Rate (0)
Rajesh_s Experienced Member Joined: 10/20/2011 Last visit: 2/12/2023 Posts: 99 Rating: (3)	dear all, i am using TIA V11 SP2 U3, i need to convert the TIA V10.5 SP2 program to the current version it shows some error, please clarify what to do Attachment untitled 1.jpeg (48 Downloads)

Suggestion To thank Quote Answer

8/22/2012 1:03 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 3/24/2023 Posts: 4180 Rating: (1332)	Hi, first of all, I suggest you to upgrade your V11 to V11 SP2 upd4. If the fault stays, I suggest you to open a Support Request to check the original project.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

8/22/2012 2:27 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 3/31/2023 Posts: 13226 Rating: (2152)	Rockie dear all, i am using TIA V11 SP2 U3, i need to convert the TIA V10.5 SP2 program to the current version it shows some error, please clarify what to do I agree with Pegaia that the SP2 Upd 4 is good idea as it helped with many migration issues. Perhaps it will help with yours. If you feel you must figure it out on your own using update 3 (not the choice I would make), you can click the link shown in your uploaded image for the log file. Somewhere in the log file it will give a strong hint as to what did and did not convert. If you are using PIDs in V10.5 SP2 or running timer bits, you will need to change the logic. It may even make sense to remove the PID blocks and attempt the migration again.
	science guy
Suggestion To thank Quote Answer

5/17/2014 9:34 AM	Rate (0)
Rajesh_s Experienced Member Joined: 10/20/2011 Last visit: 2/12/2023 Posts: 99 Rating: (3)	Dear sir, Now i am using TIA V11 SP5 the same problem presist.what can i do.

Suggestion To thank Quote Answer

5/17/2014 10:09 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 3/2/2023 Posts: 10221 Rating: (1175)	As it has been suggested above -Support Request

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on