Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-1200 convert Time to S5time

Created by: Ragupathy at: 8/19/2014 1:54 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

8/19/2014 1:54 AM	Rate (0)
Ragupathy Posts: 1 Rating: (0)	Hi i need help in converting Time to S5time in S71200, in s7-300 converted using T_conv Thanks in Advance Ragu
Ragupathy Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

8/19/2014 12:20 PM	Rate (0)
eisenpferdreiter Posts: 1058 Rating: (93)	Ragupathy Hi i need help in converting Time to S5time in S71200, in s7-300 converted using T_conv Thanks in Advance Ragu Hello Ragupathy, FC40 TIM_S5TI does exactly that. You find FC40 in Standard Library under IEC Function blocks. regards
eisenpferdreiter Posts: 1058 Rating: (93)
Suggestion To thank Quote Answer

8/19/2014 1:17 PM	Rate (0)
William_B Posts: 5225 Rating: (1198)	Ragupathy Hi i need help in converting Time to S5time in S71200, in s7-300 converted using T_conv Thanks in Advance Ragu Hi there. Am I to understand you wish.. * use the S7-1200 * convert TIME type to S5TIME type * use the same converting as S7-300 has available...? S7-1200 does not natively handle the S5TIME type. Therefore this S5TIME converting process is not handled with a standard function. The S7-1500 does handle this natively and converting is possible. It will be very interesting to know WHY this is needed. You are welcome to do this with your own function. Please see a description on how the S5TIME is constructed in the attached JPEG. Careful.. S5TIME is a three digit BCD number with a 4 bit time base indication. Please share with us your thoughts.. w Attachment Description of S5TIME type.jpg (769 Downloads)
William_B Posts: 5225 Rating: (1198)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users KontiProzesse

|

Share this page:

Share this page on...

Follow us on