Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-1200 Datalog problem

Created by: MarjanMM at: 12/4/2013 2:08 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/4/2013 2:08 PM	Rate (0)
MarjanMM Posts: 51 Rating: (1)	Hello everyone, I have S7-1212 DC/DC/Rly with 12MB SD card. I am logging 20 string parameters in one .CSV file. If I set number of records to 255 in DataLogCreate block, the system create's the csv file and datalogger is working. If I set number of records more then 255 (I want't 3000 samples) the system does not create the csv file. Why is this? Best regards
MarjanMM Posts: 51 Rating: (1)
Suggestion To thank Quote Answer

12/4/2013 3:01 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 1/24/2025 Posts: 15558 Rating: (2468)	MarjanMM Hello everyone, I have S7-1212 DC/DC/Rly with 12MB SD card. I am logging 20 string parameters in one .CSV file. If I set number of records to 255 in DataLogCreate block, the system create's the csv file and datalogger is working. If I set number of records more then 255 (I want't 3000 samples) the system does not create the csv file. Why is this? Best regards Your strings, are they the default string length (255) or have they been reduced to a realistic size to hold the max content size? @ 255 records with the default string length, that is 1.3 MB per dataset. Are you removing the old dataset before creating a new dataset at the larger size? What error is returned for the create instruction when it fails?
	science guy
Suggestion To thank Quote Answer

12/9/2013 3:56 PM	Rate (0)
MarjanMM Posts: 51 Rating: (1)	Hello, If I don't use STRING then It is no problem. Now I am using INT wich I am writing to my csv. Best regards
MarjanMM Posts: 51 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on