Navigation

S7-1200 PLC

Created by: siemensuiapl at: 7/17/2018 9:37 AM (28 Replies)

7/17/2018 9:37 AM	Rate (0)
siemensuiapl Bronze Member Joined: 3/3/2016 Last visit: 10/26/2024 Posts: 140 Rating: (0)	I have S7-1214C AC/DC/RLY PLC.This PLC have a Error Fault.I can not access this PLC. I have enclosed the error message. Kindly update the reset this password. Attachment screen-1.png (778 Downloads)

Suggestion To thank Quote Answer

7/17/2018 10:34 AM	Rate (0)
siemensuiapl Bronze Member Joined: 3/3/2016 Last visit: 10/26/2024 Posts: 140 Rating: (0)	kindly update anybody.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users xiaoby

7/17/2018 11:12 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 1/24/2025 Posts: 34557 Rating: (4313)	Maybe this FAQ can help: How can you delete the IP address and reset your S7-1200 to factory settings using the SIMATIC MC memory card?

Suggestion To thank Quote Answer

7/17/2018 11:23 AM	Rate (0)
siemensuiapl Bronze Member Joined: 3/3/2016 Last visit: 10/26/2024 Posts: 140 Rating: (0)	i tried to insert Empty Simatic 2MB memory card for reset,but can not access.In PLC error LED continuously blinking.

Suggestion To thank Quote Answer

7/17/2018 5:02 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 1/24/2025 Posts: 15558 Rating: (2468)	Have you tried powering off the PLC for 30 minutes and powering it back up? What firmware S7-1214 do you have? siemensuiapl i tried to insert Empty Simatic 2MB memory card for reset,but can not access.In PLC error LED continuously blinking.
	science guy
Suggestion To thank Quote Answer

Joined: 3/3/2016

Last visit: 10/26/2024

Posts: 140

Rating:

(0)

This PLC have Firmware is

V01.00.00_00.00.00.00

. This details taken from Simatic Automation Tool v2.01.00.00.I have enclosed the error snop shoot.

Desktop.zip (783 Downloads)

7/18/2018 10:26 AM	Rate (0)
siemensuiapl Bronze Member Joined: 3/3/2016 Last visit: 10/26/2024 Posts: 140 Rating: (0)	I have enclosed the PLC Status after insert the Memory card. Attachment Desktop.zip (665 Downloads)

Suggestion To thank Quote Answer

7/18/2018 10:27 AM	Rate (0)
siemensuiapl Bronze Member Joined: 3/3/2016 Last visit: 10/26/2024 Posts: 140 Rating: (0)	kindly update above issue.

Suggestion To thank Quote Answer

7/18/2018 11:57 AM
siemensuiapl Bronze Member Joined: 3/3/2016 Last visit: 10/26/2024 Posts: 140 Rating: (0)	hi

Suggestion Quote Answer

7/18/2018 12:04 PM	Rate (0)
Jay. Posts: 1283 Rating: (105)	Hi You can only try factory settings with proper simatic SD card. Thanks, Jay siemensuiapl hi
Jay. Posts: 1283 Rating: (105)
Suggestion To thank Quote Answer

Share this page:

Share this page on...