Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 1200 UPLOAD PROBLEM

Created by: vipz at: 10/1/2012 4:00 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

10/1/2012 4:00 PM	Rate (0)
vipz Gold Member Joined: 9/2/2012 Last visit: 1/16/2025 Posts: 711 Rating: (30)	Dear experts, I am fcing some problem with s7 1200 uploading. Am using tia portal( professional v 11 sp2 update 4, hardware 1214, firmware 2.1.2). 1.I have configured cpu clock, memory retentive for 24 bytes and developed program and downloaded. 2.But while uploading, cpu clock property,retentive option etc are not get uploded. 3. For uploding, am creating new project with un specified cpu, then detect hardware option using. Is it correct or any other way to overcome this problem?? regards
	With Best Regards VIPZ
Suggestion To thank Quote Answer

10/1/2012 4:19 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 1/17/2025 Posts: 15541 Rating: (2465)	Please submit your download problem (to plc) to Siemens Tech Support via the Support Request.If the upload (from plc) does not get all settings, unfortunately, that seems to be what Siemens considers normal. If enough people complain that is abnormal, perhaps it will change in future firmware releases.
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users billwest

10/3/2012 9:52 AM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 12/10/2024 Posts: 2957 Rating: (243)	Hi, Read chapter 6.8.1 of SIMATIC S7 S7-1200 Programmable controller manual and you will see that only program blocks, technology blocks and tags will be uploaded. HW configuration is not uploaded for S7-1200 CPU.
	Best regards, Darius
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on