Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 1200

Created by: techovrlrd at: 5/18/2013 7:40 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/18/2013 7:40 AM	Rate (0)
techovrlrd Posts: 12 Rating: (0)	Hey All, I need help. I have inherited a project and I am having lots of problmes. I have a S7 1200 with a 200 remote, an HMI panel, and 2 VFD MM420 drives. I can not get the cpu to go into run, I can flash the cpu, but when I try and go online, it breaks connection and displays one of two messages, one is not compatible and two is cpu installed is differnt from configuration. I can not get the system to run. I have flashing green led's on all modules except the 1214 which has a solid amber light. Any and all help would be greatly appreciated. Thanx
techovrlrd Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

5/18/2013 10:48 AM	Rate (0)
Siddharth Panchal Posts: 27 Rating: (0)	set all mlfb number like 6es7 someting in hardware config.ok....
Siddharth Panchal Posts: 27 Rating: (0)
Suggestion To thank Quote Answer

5/18/2013 2:20 PM	Rate (0)
DS SURESH KUMAR Bronze Member Joined: 4/17/2012 Last visit: 9/7/2023 Posts: 474 Rating: (10)	give your complete MLFB number, i will check and tell
	Last edited by: Dsuresh at: 5/18/2013 2:20 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on