Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-1212 webserver slow

Created by: MarjanMM at: 11/27/2012 1:27 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

11/27/2012 1:27 PM	Rate (0)
MarjanMM Posts: 51 Rating: (1)	Hello! I have created a program (6xFBs, 40xDBs) with a simple webserver (jpg picture and 20 parameters). When I connect direct to my user defined webpages, the connection is very slow. Oage is refreshing 15-30s. How can I speed up the refreshing of the page? Best regards
MarjanMM Posts: 51 Rating: (1)
Suggestion To thank Quote Answer

11/27/2012 1:33 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 12/6/2024 Posts: 15468 Rating: (2455)	MarjanMM Hello! I have created a program (6xFBs, 40xDBs) with a simple webserver (jpg picture and 20 parameters). When I connect direct to my user defined webpages, the connection is very slow. Oage is refreshing 15-30s. How can I speed up the refreshing of the page? Best regards Try setting the system overhead % higher than the default of 20%. I use 30-40%. Try putting all parameters into a single DB to simplify data access, then change your web page to access the DB data. These tips should dramatically speed up the update time. If you do not have a new PLC with FW 3.x, you can try that as they are significantly faster.
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users esein

11/27/2012 1:51 PM	Rate (0)
MarjanMM Posts: 51 Rating: (1)	Hello, that was fast, thank you for the answer. I have checked my firmware of PLC (2.2). Can I update to 3.0 or higher? Where can I get the fw:3.0 Best regards
MarjanMM Posts: 51 Rating: (1)
Suggestion To thank Quote Answer

11/27/2012 3:24 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 12/6/2024 Posts: 15468 Rating: (2455)	MarjanMM Hello, that was fast, thank you for the answer. I have checked my firmware of PLC (2.2). Can I update to 3.0 or higher? Where can I get the fw:3.0 Best regards Rigth now the only way I know of to get FW 3.x is to purchase the new S7-1200 PLCs -- they have new part #'s. The part #'s are searchable in google and using the search box up there ----->>---////
	science guy
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on