Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-1215 webserver watch tabels

Created by: J Gerritsen CDM at: 3/16/2015 12:24 PM (8 Replies)

Rating (0)

Thanks 1

9 Entries

3/16/2015 12:24 PM	Rate (0)
J Gerritsen CDM Regular Member Joined: 7/27/2012 Last visit: 12/5/2024 Posts: 24 Rating: (0)	Hello How can i view the watch tabels in the web server? Attachment screenshot.45.jpg (254 Downloads)

Suggestion To thank Quote Answer

3/16/2015 3:09 PM	Rate (0)
Robster Gold Expert Joined: 5/28/2008 Last visit: 10/23/2024 Posts: 1343 Rating: (141)	With the right settings in user management of the webserver, this should be possible. Then you will see in the menu the "watch table" entry.

Suggestion To thank Quote Answer

3/19/2015 3:22 PM	Rate (0)
J Gerritsen CDM Regular Member Joined: 7/27/2012 Last visit: 12/5/2024 Posts: 24 Rating: (0)	Have some one this working?

Suggestion To thank Quote Answer

3/19/2015 4:03 PM	Rate (0)
Robster Gold Expert Joined: 5/28/2008 Last visit: 10/23/2024 Posts: 1343 Rating: (141)	Have you tried the user management settings? I only have FW3.0 PLC, there this was not possible. But I know from 1500 PLC that this should work. What can you see at the web site? Screenshot?

Suggestion To thank Quote Answer

3/20/2015 11:18 AM	Rate (0)
J Gerritsen CDM Regular Member Joined: 7/27/2012 Last visit: 12/5/2024 Posts: 24 Rating: (0)	i have full acces as admin. But no tables Please someone let me no is thisworking ???? or not avaleble on 1215 Attachment screenshot.60.jpg (235 Downloads)

Suggestion To thank Quote Answer

3/20/2015 4:41 PM	Rate (0)
William_B Posts: 5225 Rating: (1198)	I have also asked the same questions a while ago when we started using the FW4.0 PLCs. This would be a very good tool to have! Sorry my friend.. this functionality is not available to the S7-1200 FW4.0, even if the TIA software says it should be. - - at least that was the result at that time. [LINK] I do not know yet if the situation is different for FW4.1.1. w
William_B Posts: 5225 Rating: (1198)	Last edited by: William_B at: 3/20/2015 4:44:30 PM add back-link
Suggestion To thank Quote Answer

11/13/2015 10:48 AM	Rate (0)
enof Silver Member Joined: 2/10/2012 Last visit: 1/9/2025 Posts: 315 Rating: (59)	Nope. Doesn't seems to work on firmware 4.1.3 either. (tested/tried with cp1214 v13sp1upd5)
	Last edited by: enof at: 11/13/2015 10:49:00 AM Last edited by: enof at: 11/13/2015 10:49:23 AM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users William_B

11/13/2015 8:43 PM	Rate (0)
siyahmardan Posts: 2 Rating: (0)	enof Nope. Doesn't seems to work on firmware 4.1.3 either. (tested/tried with cp1214 v13sp1upd5) I tried to use it too , without any results ,my problem is that :if it's not going to work why it's possible to add it to s7-1200 web server?
siyahmardan Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

7/13/2017 11:34 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/24/2025 Posts: 8808 Rating: (1177)	Hello, When you update the firmware to v4.2 (and use TIA Portal v14) You can use "Watch tables" in Webserver. Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on