Navigation

S7-1500 Communication with CU320-2 PN - Cannot control it through any Technology object- commisioning

Created by: ESOX-AUTOMATION at: 3/27/2019 9:07 PM (1 Replies)

3/27/2019 9:07 PM	Rate (0)
ESOX-AUTOMATION Regular Member Joined: 5/19/2017 Last visit: 10/10/2024 Posts: 11 Rating: (0)	I found problem. Main problem was that it was connected through Scalance. I have change this connection to directly to second port and it works!:) Thanks for help. But next problem is that i cannot control it through any Technology object- commisioning and also through control panel in Starter... In all servo i have error when i try to get control via control panel(after click yellow button)... And also on one of inverter i have error: Fault: 09.01.00 20:08:49:035 100T1 Hauptantriebe : SERVO_03 -- 7950 : Drive: Incorrect motor parameter(Parameter: 311) Fault: 09.01.00 19:42:36:295 100T1 Hauptantriebe : SERVO_03 -- 1670 : SI Motion: Invalid parameterization Sensor Module(10) Fault: 09.01.00 19:42:36:287 100T1 Hauptantriebe : SERVO_03 5 - Motor_Module_5 30650 : SI P2: Acceptance test required(1000) Fault: 09.01.00 19:42:35:255 100T1 Hauptantriebe : SERVO_03 1 - Control_Unit_1 1680 : SI Motion P1 (CU): Checksum error safety monitoring functions(0) And i cannot find solution where is the problem... ------------------------------------------------------------------------------------------ Split from S7-1500 Communication with CU320-2 PN. Attachment error_switch.png (71 Downloads)
	Last edited by: Jen_Moderator at: 3/28/2019 8:06:10 AM New subject after splitting
Suggestion To thank Quote Answer

3/28/2019 6:46 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/11/2024 Posts: 22410 Rating: (3017)	Hello, check the parameters which reported in the Error messages(p311, P10). Kan you say which motor /SMC you use? for the first you should deactivate Safety and show that you run the drive correctly eithout safety , after that you can activate and configure Safety. Regards Christoph

Suggestion To thank Quote Answer