Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-1500 connecting to TP-277

Created by: Cyanogen281 at: 2/12/2016 6:42 PM (4 Replies)

Rating (2)

Thanks 5

5 Entries

2/12/2016 6:42 PM	Rate (0)
Cyanogen281 Regular Member Joined: 8/26/2014 Last visit: 7/15/2024 Posts: 10 Rating: (0)	Hello, I am trying to connect an S7-1500 PLC to a TP-277 HMI. When I try to configure the connection in TIA Portal (V13) it tells me that the "Communication driver cannot be used with the HMI device" Also, the S7-1500 is not in the list of communication drivers inside the connections portion of TIA Portal Does the S7-1500 support connections to a TP-277? Any advice or tips would be greatly appreciated.

Suggestion To thank Quote Answer

2/12/2016 11:37 PM	Rate (0)
MAZENJER Silver Member Joined: 8/31/2013 Last visit: 1/14/2025 Posts: 607 Rating: (41)	Hello You should Browse your HMI to PLC in HMI configuration wizard in TIA portal
	Warm Regards MAZENJER
Suggestion To thank Quote Answer

2/14/2016 8:23 PM	Rate (0)
Online Tech Platinum Member Joined: 3/28/2015 Last visit: 1/24/2025 Posts: 722 Rating: (214)	Hello, Perhaps the following topic might help: Which panels can communicate with a SIMATIC S7-1200 or S7-1500 in the TIA Portal?
	Eng.Mohamed Ibrahim WhatsApp : +201122880543
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Kahl

2/15/2016 1:02 PM	Rate (2)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 1/24/2025 Posts: 14651 Rating: (1825)	Hello Cyanogen281 The FAQ is not available for normal Users like us anymore. But In my own words no you cannot use an automatic integrated connection from a S71500 to a TP277. Yes you can connect them by using a manual connection. Go to the Panel and create a new connection. Use the S7300/400 Driver use Expansion Slot 1. In the Properties of the S71500 go to "protection" -> permit Access...Put Get... Activate this Option. you can now access the PLC but only without a Connection Password and only to non Optimezed Data Blocks. I Hope it helps Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Kahl cliff.pennalligen

2/18/2016 11:30 AM	Rate (0)
H.J. Gold Member Joined: 6/3/2014 Last visit: 9/26/2024 Posts: 660 Rating: (194)	Hello @ all, FYI: the FAQ is online again. (https://support.industry.siemens.com/cs/ww/de/view/109475049) There are some additions. Online Tech Hello, Perhaps the following topic might help: Which panels can communicate with a SIMATIC S7-1200 or S7-1500 in the TIA Portal?
	~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ★ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Kahl Murof

|

Share this page:

Share this page on...

Follow us on