Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 1500 - Press Aplication

Created by: MateuszM at: 10/8/2019 2:31 PM (2 Replies)

Rating (1)

Thanks 0

3 Entries

10/8/2019 2:31 PM	Rate (0)
MateuszM Member Joined: 9/20/2017 Last visit: 6/6/2024 Posts: 1 Rating: (0)	Hello, Can I use CPU 1513-1 PN in Press aplication ? There is any product approval or certifivate ?

Suggestion To thank Quote Answer

10/8/2019 7:02 PM	Rate (0)
CaOd Platinum Expert Joined: 5/6/2010 Last visit: 9/2/2024 Posts: 1978 Rating: (276)	Hello, if you have a safety application then you need a PLC with F-functionallity. I don't know nothing about your application. But if you need e.g.a 2-hand-switch or... then you need a safety application. The best way is you contact your Siemens-partner to check your application and give you a advice for a solution. regards CaOd

Suggestion To thank Quote Answer

10/8/2019 7:10 PM	Rate (1)
miami Platinum Member Joined: 8/31/2005 Last visit: 8/20/2024 Posts: 2198 Rating: (328)	Searching for Press i found: https://support.industry.siemens.com/cs/ww/en/view/82605334 https://support.industry.siemens.com/cs/ww/en/view/48299432

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on