Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-200 & CP5611 A2 PCI- card !

Created by: Tomy Master at: 12/5/2009 9:55 PM (13 Replies)

Rating (1)

Thanks 3

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

12/5/2009 9:55 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/9/2022 Posts: 906 Rating: (40)	Hello experts... Does any body has an experience connecting S7-200 & CP5611 A2 PCI-card. any idea any help, I will be greatful. Warm regards. Tomy the Master.
	Aim Higher
Suggestion To thank Quote Answer

12/6/2009 3:30 AM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 1/17/2023 Posts: 1525 Rating: (159)	Hi Tomy, Yes, I have done the communication with CP 5611 & S7-200 PLC. you have to set the CP5611 PPI in set PG/PC interface. What is your problem in that ? please let me know by any Screen Shot.
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

12/6/2009 11:42 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/9/2022 Posts: 906 Rating: (40)	Dear Ammy... First of all I would like ti thank you for your attention. I need the configuration of the connection cable between CP5611 & S7-200 port. Regards, Tomy
	Aim Higher
Suggestion To thank Quote Answer

12/7/2009 4:30 AM	Rate (1)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 1/17/2023 Posts: 1525 Rating: (159)	Hi Tomy, It is same which we used for Standard MPI (3-3, 5-5, 8-8) or you can also used the Profibus Cable & connector for same.
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users J_Bell Tomy Master

12/11/2009 7:38 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/9/2022 Posts: 906 Rating: (40)	Dear Ammy... Please, take a look at the attached snap shot, it shows clearly that "CP5611 Plug & Play" can not be installed. Also, I have learned that I should use the SIMATIC NET software that makes life easy. If there is such a software, would please show me the linked. Warm regards. Tomy. Attachment CP5611.JPG (157 Downloads)
	Aim Higher
Suggestion To thank Quote Answer

12/11/2009 8:17 PM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 1/17/2023 Posts: 1525 Rating: (159)	Hi Tomy, Have you checked in the Device manager The CP 5611 A2 is showing under the "Simatic Net". If it is then there is the some thing problem & CP 5611 did't required any software. it required any of the Programining Software Like Step 7, Microwin, WinCC etc... Please tell me the OS on which your working, it is not a Windows 7? & from Screen Shot I observed that on right hand side task bare the battery Symbol, the screen shot you have taken on laptopor desktop? Please tell me the detail to help you .............
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

12/12/2009 9:45 AM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/9/2022 Posts: 906 Rating: (40)	Dear Ammy... Yes, it was on my laptop, but it was only for demostration. I have a costumer who is working with me on his desktop and he is facing the same problem, his operating system is windows XP professtionalSP2. Thank you for attention. Tomy.
	Aim Higher
Suggestion To thank Quote Answer

12/12/2009 9:48 AM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/9/2022 Posts: 906 Rating: (40)	Oh sorry... May be I got you wrong, the operating system is Step7 Micro/Win. Warm regards. Tomy.
	Aim Higher
Suggestion To thank Quote Answer

12/12/2009 4:03 PM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 1/17/2023 Posts: 1525 Rating: (159)	Hi Tomy, Have you checked on Customer PC in Device Manager Under Simatic Net you can able to See the CP 5611, if yes then CP is detected & it will work, if not Please Remove the CP Again & insatll it carefully. please let me now the progress.....
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

12/15/2009 11:43 AM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/9/2022 Posts: 906 Rating: (40)	Dear Ammy... I have performed the last step, it seems that it did not recognize the PCI card you can refer to the attached snap shot. Please, I need help. Warm regards. Tomy. Attachment cp5611.GIF (116 Downloads)
	Aim Higher
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on