Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

s7 200 program migration to the 1200 platform

Created by: ScottWS at: 4/11/2012 3:41 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/11/2012 3:41 PM	Rate (0)
ScottWS Posts: 1 Rating: (0)	Hello, I have just started a project that requires me to migrate the ladder logic off of a s7200 PLC to the new 1200. Is there a transfer tool I can use for the migration? How good is it? Thanks all, -Scott
ScottWS Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

4/11/2012 6:03 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 12/2/2024 Posts: 10229 Rating: (1181)	Hello, There exist a tool for migration. Take a look atSTEP 7 Micro/WIN v4 project to STEP 7 v11 project best regards, Hristo Mihalev

Suggestion To thank Quote Answer

4/11/2012 6:06 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 11/18/2024 Posts: 5697 Rating: (715)	Hello, there is(was) a tool [url=/tf/WW/en/Posts/39878] s7-200 to s7-1200 conversion program [/url] but i believe it was for V10.5. As all converters the result was disapointing (from hear say) I believe you faster convert it by hand in the end. regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on