Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-300 CPU stations & SINAUT & OLM

Created by: Tomy Master at: 2/16/2010 10:37 AM (5 Replies)

Rating (1)

Thanks 1

6 Entries

2/16/2010 10:37 AM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/9/2022 Posts: 906 Rating: (40)	Dear experts... Currently, I have a big project which contains a number of S7-300 CPU stations& SIEMENS industrialprogrammers(PG). In this project I want to connect a master station (CPU313C-2DP) via OLM (Optical Link Module) with four slave stations (also CPU313C-2DP) in star topology, and then each slave CPU is connected with a number stations (CPUs, soft starters and power meters) via ProFibus protocol in a line type topology. Also on other end I want to connect a CPU stationvia TIM & MD3 to another MD3 at the other end of the network (also CPU313C-2DP). Please I want a conformation if my designis correct, and if not I am reallyin great needof your help. Thank you in advance. Tomy the Master
	Aim Higher
Suggestion To thank Quote Answer

2/16/2010 5:27 PM	Rate (0)
J_Bell Posts: 5822 Rating: (411)	Dear Tomy, well... as far as I know this works pretty well... The communication over the TIM 3V and the PROFIBUS communication should not interfere each other. It is configured on separate ways. But I wonder... why do you use a dial up modem on a redundant PROFIBUS network? Best regards J_Bell
J_Bell Posts: 5822 Rating: (411)
Suggestion To thank Quote Answer

2/16/2010 7:30 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/9/2022 Posts: 906 Rating: (40)	Dear J_Bell... Please refer to the attached file it is depicted in AUTOCAD in this attachement you will see my design for this network, I hope this will help you correcting me. Warm regards. Tomy. Attachment Network.zip (57 Downloads)
	Aim Higher
Suggestion To thank Quote Answer

2/22/2010 2:19 PM	Rate (0)
J_Bell Posts: 5822 Rating: (411)	Dear Tomy, I am sorry but I do not have Auto-CAD available maybe you can convert your picture to a more familiar format, like JPEG or PNG or something more comparable. Best regards J_Bell
J_Bell Posts: 5822 Rating: (411)
Suggestion To thank Quote Answer

2/26/2010 12:14 AM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/9/2022 Posts: 906 Rating: (40)	Ok Here my design drawings as you wish. Regards. Tomy the Master Attachment Network.zip (50 Downloads)
	Aim Higher
Suggestion To thank Quote Answer

2/28/2010 1:52 AM	Rate (1)
J_Bell Posts: 5822 Rating: (411)	Dear Tommy, well, I see no problem with this configuration, you use an OLM Star configuration. This is certainly no Problem, at least in my eyes. I only hope that the PROFIBUS lines at the Ends of the star are not too long. Best regards J_Bell
J_Bell Posts: 5822 Rating: (411)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

|

Share this page:

Share this page on...

Follow us on