Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-300 profibus communication with Sick CLV620

Created by: FVR_DAN at: 1/31/2013 9:19 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/31/2013 9:19 AM	Rate (0)
FVR_DAN Experienced Member Joined: 9/19/2011 Last visit: 6/7/2023 Posts: 31 Rating: (0)	Dear How can i receive data from a Sick CLV620? Is there some standard block? I've configured the scanner in my hardware with profibus adres 28 and a universal module with input adres 256 en output adres 256 with length of 32 bytes. I hope you can help me. Mvg Frederik

Suggestion To thank Quote Answer

1/31/2013 9:46 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (707)	Hello, Please have a look at the Sick site for Software, You will find a step 7 block with documentation. Regards, Marcjan
	Last edited by: Marcjan at: 1/31/2013 9:53 AM Last edited by: Marcjan at: 1/31/2013 9:48 AM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

2/1/2013 7:46 PM	Rate (0)
Eastern Posts: 557 Rating: (64)	Hello, I think you need gsd file only on profibus so that you can configure on simatic manager & communicate. Regards
Eastern Posts: 557 Rating: (64)
Suggestion To thank Quote Answer

3/27/2014 9:41 AM	Rate (0)
GrasserF Posts: 344 Rating: (6)	new question is splittet to FB from Sick supplier, communication error
GrasserF Posts: 344 Rating: (6)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on