Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 300 - Reset PLC password - URGENT

Created by: Snail.cz at: 7/8/2011 5:06 AM (13 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

7/8/2011 5:06 AM	Rate (0)
Snail.cz Advanced Member Joined: 8/12/2010 Last visit: 7/17/2024 Posts: 16 Rating: (1)	Hi all, Right now I am on Commisioning in Vietnam and I need urgent help with resetting PLC password. I have got safety PLC S7 300, CPU 315F-2 PN/DP. I have correct password for safety program, but when I want download safety program or HW configuration to PLC I need another which I don’t have. So, my questions are: 1) PLC password is stored on MMC? Because I tried reset PLC to delivery state and it didn’t help me. 2) Is there any possibility to format card without any special tool? In Siemens manual is written, that I cannot reset MMC in PLC using MRES button unless PLC isn’t requesting it. Any other idea? I can completely erase all program in PLC, it doesn’t matter. Thank all very much.
	Last edited by: O_Moderator at: 7/8/2011 7:28 AM information edited
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Gilbertogps

7/8/2011 8:08 AM	Rate (0)
Niranjan Prasad Posts: 691 Rating: (37)	Snail.cz 2) Is there any possibility to format card without any special tool? In Siemens manual is written, that I cannot reset MMC in PLC using MRES button unless PLC isn’t requesting it. If you have Siemens PG with you, then you can simply plug the MMC card in the PG and access/delete the program written in the MMC. Another Idea which I have not tried. Plug the MMC in the normal Card Reader. Plugging the MMC of Sinamics Drive in the Card Reader , I was able to read the GSD file stored in it
Niranjan Prasad Posts: 691 Rating: (37)
Suggestion To thank Quote Answer

7/8/2011 9:01 AM	Rate (0)
Snail.cz Advanced Member Joined: 8/12/2010 Last visit: 7/17/2024 Posts: 16 Rating: (1)	Thanks, but I don't have Siemens PG with me.

Suggestion To thank Quote Answer

7/8/2011 9:23 AM	Rate (0)
Niranjan Prasad Posts: 691 Rating: (37)	Then try the second option and give me the feedback
Niranjan Prasad Posts: 691 Rating: (37)
Suggestion To thank Quote Answer

7/8/2011 12:31 PM	Rate (0)
Snail.cz Advanced Member Joined: 8/12/2010 Last visit: 7/17/2024 Posts: 16 Rating: (1)	Niranjan Prasad Then try the second option and give me the feedback Ok I will try this tomorrow. But I dont think it will work. I need delete password from it, or format all card. But Thanks...

Suggestion To thank Quote Answer

7/8/2011 1:20 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 9/10/2024 Posts: 10228 Rating: (1181)	Hello, I'll show you almost the same things metioned above. http://support.automation.siemens.com/WW/view/en/13992345 Description It is not possible for users to format a SIMATIC Micro Memory Card (MMC). All you can do is "reset" an MMC, which deletes all user data. How to reset an MMC is described in Entry ID: 29801950. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

7/9/2011 2:18 PM	Rate (0)
Snail.cz Advanced Member Joined: 8/12/2010 Last visit: 7/17/2024 Posts: 16 Rating: (1)	Hi, I solved my problem.
	Last edited by: O_Moderator at: 7/9/2011 6:08 PM
Suggestion To thank Quote Answer

7/9/2011 11:27 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (999)	Snail.cz Hi, I solved my problem. How?
IBN-Service Posts: 8946 Rating: (999)
Suggestion To thank Quote Answer

7/10/2011 1:11 AM	Rate (0)
Snail.cz Advanced Member Joined: 8/12/2010 Last visit: 7/17/2024 Posts: 16 Rating: (1)	IBN-Service Snail.cz Hi, I solved my problem. How? I cant post it here.

Suggestion To thank Quote Answer

7/11/2011 8:11 AM	Rate (0)
Aret Posts: 2348 Rating: (264)	I cant post it here. Looks like via MMC images)
Aret Posts: 2348 Rating: (264)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on