Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-300 stations & SINAUT.

Created by: Tomy Master at: 1/25/2010 4:38 PM (3 Replies)

Rating (3)

Thanks 0

4 Entries

1/25/2010 4:38 PM	Rate (1)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 7/29/2023 Posts: 914 Rating: (40)	Dearexperts... Please, I need your help. I am in the final stage before ordering items from SIEMENS. I need to know if we have a "master" station (CPU313C-2DP) and I want to connect to a three "slave" stations (again CPU313C-2DP) by using TIM's modules & MD3 modems. My question is, if I want to configure a star connection between the "master" &"salves", how many TIM's & MD3's I have to configure in the "master" station. I do appreciate your support. Warm regards. Tomy.
	Aim Higher
Suggestion To thank Quote Answer

1/25/2010 5:18 PM	Rate (1)
J_Bell Posts: 5822 Rating: (411)	Dear Tomy, well... actually it depends. With dial up modems, no leased lines, you may have one to the number of modems you need to connect to all you stations. It mostly depends actually on the number of phone lines you have. Usually your TIM calls one remote station after the other, depending on the need for data to be collected or sent. From my point of view one is really sufficient... but I do not know how the technical needs or circumstances are at your site. Best regards J_Bell
J_Bell Posts: 5822 Rating: (411)
Suggestion To thank Quote Answer

1/26/2010 2:21 AM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 7/29/2023 Posts: 914 Rating: (40)	Hi.... So you it is enough to use one TIM & one Modem? Correct me if i am wrong. Regards. Tomy.
	Aim Higher
Suggestion To thank Quote Answer

1/26/2010 10:46 AM	Rate (1)
J_Bell Posts: 5822 Rating: (411)	Dear Tomy, with a dial up modem, yes. If you would have three least lines, this would be slightly different. Best regards J_Bell
J_Bell Posts: 5822 Rating: (411)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on