Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-300R Software redundancy programming

Created by: Vigneshwara at: 11/20/2015 6:15 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

11/20/2015 6:15 AM	Rate (0)
Vigneshwara Regular Member Joined: 2/1/2012 Last visit: 11/7/2024 Posts: 19 Rating: (0)	Dear all, I have programming the S7-300 R Software redundancy . We are using CPU 319 & CP343-5 communication processor with ET200M System. I have programmed the redundancy program in OB100 but i was till confuse in the setting the parameter kindly help in the issue. kindly send me any sample program for S7-300R software redundancy using CP343-5 kindly send me the Manual and back up . Thanks VMS
	Last edited by: Vigneshwara at: 11/20/2015 7:01:29 AM
Suggestion To thank Quote Answer

11/20/2015 8:53 AM	Rate (0)
Dongerpure Bronze Member Joined: 3/8/2011 Last visit: 5/17/2023 Posts: 262 Rating: (21)	Dear Vigneshwara, Please go to the followed link for information http://support.automation.siemens.com/WW/view/en/1137637 https://support.industry.siemens.com/cs/mdm/1137637?c=18683190923&lc=en-WW
	If this post helped you, you may use the Rate-button
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ParamReehal

11/20/2015 10:29 AM	Rate (0)
Jagank Posts: 5 Rating: (0)	Dear dongerpura, Thanks for you reply, but i have the same issue. i can't connect to your posted link kindly send the link with hyper link so that i can directly connect. Regrads K.Jagan
Jagank Posts: 5 Rating: (0)	Last edited by: Jagank at: 11/20/2015 10:30:13 AM
Suggestion To thank Quote Answer

11/20/2015 3:54 PM	Rate (0)
Dongerpure Bronze Member Joined: 3/8/2011 Last visit: 5/17/2023 Posts: 262 Rating: (21)	Dear, Please select the link and goto :)
	If this post helped you, you may use the Rate-button
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on