Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-315-2DP to ET200S

Created by: NickH at: 1/3/2012 5:12 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

1/3/2012 5:12 PM	Rate (0)
NickH Posts: 5 Rating: (0)	Hi all, Have a system with the above components, do any programming examples exist anywhere to get me started ? Thanks, Nick
NickH Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

1/3/2012 7:10 PM	Rate (0)
Gabriel de Oliveira Bronze Member Joined: 2/16/2011 Last visit: 6/1/2023 Posts: 229 Rating: (27)	Hello, What do you want to use, TIA Portal, or Simatic Step 7? Regards Gabriel de Oliveira
	Last edited by: CS Moderator at: 1/4/2012 9:14 AM contact data deleted Gabriel de Oliveira It Works? Rate It.
Suggestion To thank Quote Answer

1/4/2012 6:15 AM	Rate (0)
Asanga Regular Member Joined: 2/5/2009 Last visit: 4/16/2023 Posts: 10 Rating: (0)	Dear NickH, See these links , that might help you. /tf/WW/en/Posts/58488 /tf/WW/en/Posts/6299 Regards, Asanga.

Suggestion To thank Quote Answer

1/4/2012 7:38 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (707)	Hello, Have a look at the Training site: https://www.automation.siemens.com/mcms/sce/en/advanced_training/training_material/download_training_material/Pages/Default.aspx Here you can find a module with S7315 and ET200. Attached the complet list of Training material. Regards, Marcjan Attachment 00_guide.pdf (51 Downloads)
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

1/4/2012 4:15 PM	Rate (0)
NickH Posts: 5 Rating: (0)	Thanks for the replies guys, machine consists of two parts, both require S7-300's and Profibus is specified by our customer. Onthe main machine, which has to be the master,the I/O is on the rack, on thesecondary part of the machine the I/O is distributed around the machine via ET200S modules. We would normally have the I/O on the secondary machine part on the rack and data exchange between the two plc's using MPI. What would be the best Profibus configuration ? Two plc's linked via a DP/DP or the plc's and ET's all on the same network and use direct data exchange ? Not familar with DDE so a link would be appreciated. Thanks, Nick
NickH Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on