Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-400 H and Wonderware Communication

Created by: YogendraK at: 5/6/2009 4:05 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/6/2009 4:05 PM	Rate (0)
YogendraK Silver Member Joined: 11/9/2008 Last visit: 12/21/2024 Posts: 410 Rating: (6)	Dear All, I have S7-400 H And Wonderware SCADA in my appliction. I'm not able to change over my Wonderware from Master to Slave. Is anybody done this appliction if yes please guide me how to that or send me any link related to this appliction. I'm watting for postive reply. Regrads, Yogendra G

Suggestion To thank Quote Answer

5/12/2009 8:41 PM	Rate (0)
umencho Diamond Expert Joined: 3/21/2006 Last visit: 1/14/2025 Posts: 10239 Rating: (1182)	Hello, What kind of communication do you used between PLC and Intouch? regards Hristo Mihalev

Suggestion To thank Quote Answer

5/13/2009 12:31 PM	Rate (0)
YogendraK Silver Member Joined: 11/9/2008 Last visit: 12/21/2024 Posts: 410 Rating: (6)	Dear UMENCHO, Thanks for reply. For communication between H system and Wonderwadewe use IO server DASSIDirect. If u any idea plz suggest me. Regrads, Yogendra G

Suggestion To thank Quote Answer

5/21/2009 9:19 PM	Rate (0)
umencho Diamond Expert Joined: 3/21/2006 Last visit: 1/14/2025 Posts: 10239 Rating: (1182)	Hello Yogendra, Sory for delay. Can you attach here one drawing with your system? With how will you connect to the system. You have already estsablished connection to the CPU and only want to show if slave CPU is working... reagrds Hristo Mihalev

Suggestion To thank Quote Answer

3/11/2010 8:19 AM	Rate (0)
YogendraK Silver Member Joined: 11/9/2008 Last visit: 12/21/2024 Posts: 410 Rating: (6)	hello sir, Can u give some link where i studied communication between s7 400 plc towonderware.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on