Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 communication with Unigyr

Created by: zdenek82 at: 6/24/2008 1:07 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/24/2008 1:07 PM	Rate (0)
zdenek82 Posts: 14 Rating: (0)	Hello, i have a problem. I want to connect Unigyr I/O modules with SIMATIC S7-300. I do not known anything about P-bus communication. Is it real ? Thanks Zdeněk Spurný
zdenek82 Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

6/24/2008 1:53 PM	Rate (0)
Hulzhex Gold Member Joined: 8/25/2005 Last visit: 5/25/2023 Posts: 1161 Rating: (110)	Hello, searching about Unigyr, I found out, that this is a product of SIEMENS Building Technology. Maybe it would be better to contact them. These are informations I found: Unigyr is an "older" product. It is integreated within DESIGO now. P-Bus should be a communication protocol which is used by DESIGO and Unigyr. It doesn't correspond with the P-Bus within the S7-300 internal There exist a PROFIBUS-DP / P-Bus Link to connect DESIGO/IOs to an SIMATIC S7 Sorry found only a german document DESIGO Gebäudeautomationssystem Systembeschreibung Good luck Sabine

Suggestion To thank Quote Answer

6/25/2008 11:38 AM	Rate (0)
zdenek82 Posts: 14 Rating: (0)	Thanks a lot for your help. Zdeněk
zdenek82 Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on