Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 Ethernet Routing

Created by: pratheesh at: 1/29/2015 10:43 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/29/2015 10:43 AM	Rate (0)
pratheesh Posts: 9 Rating: (0)	Hi I want to do S7 ethernet routing between s7 319 plc and op 77b hmi . I have connected pg/pc over ethernet and op is connected to plc via profibus. I am using wincc flexible 2008 sp3 version. But in transfer setting, am not able to get aption for st etherner. Please help. Regards Pratheesh.K Attachment NETPRO.jpg (260 Downloads)
pratheesh Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

2/13/2015 11:06 AM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 8/12/2024 Posts: 1557 Rating: (161)	Hi Pratheesh, there is a helpful FAQ about transfering a project via S7 routing. You can find them there: How do you use WinCC flexible to transfer a project to an operator panel via S7 routing? With best regards

Suggestion To thank Quote Answer

8/22/2016 11:58 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by Hsmiplc is split to a separate thread with the subject How to Download program to slave PLC from Master PLC?. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on