Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 PASSWORD CHECK

Created by: 沉默 at: 11/2/2005 2:26 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

11/2/2005 2:26 PM	Rate (0)
沉默 Posts: 3 Rating: (0)	[:)] QUESTION: Where do password check when read or write PLC ? In PLC? Or in step7 program? //////////////////////////////////////////////////////////////////////////////// I only know : Data are encrypt when password down from setp7 to PLC. But ,i don't know how to encrypt password data. I want to know encrypt arithmetic! Anyone help me! thanks! I am CHINAESE, my English is awful. I'll try my best
沉默 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

11/2/2005 7:23 PM	Rate (0)
miami Platinum Expert Joined: 8/31/2005 Last visit: 9/14/2023 Posts: 2194 Rating: (322)	The password was implemented to save the KnowHow of the programmers. Just ask him/her for the password. And if you have forgot YOUR password, and you want to use the CPU with a other or saved programm you wil have to clear/reset the CPU. But by doing so, you will loose the programm inside the CPU! [:(] kind regard Dirk

Suggestion To thank Quote Answer

11/3/2005 2:04 AM	Rate (0)
沉默 Posts: 3 Rating: (0)	ASK miami: Where are password checked when data are down from step7 to plc? thank!
沉默 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

11/3/2005 2:35 AM	Rate (0)
hannibar Posts: 52 Rating: (8)	I can read plc that have password! I did it successfully!
hannibar Posts: 52 Rating: (8)
Suggestion To thank Quote Answer

11/3/2005 9:36 AM	Rate (0)
miami Platinum Expert Joined: 8/31/2005 Last visit: 9/14/2023 Posts: 2194 Rating: (322)	[quote user="沉默"]ASK miami: Where are password checked when data are down from step7 to plc? thank!I don't know.

Suggestion To thank Quote Answer

11/3/2005 7:21 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 9/22/2023 Posts: 4235 Rating: (1366)	Logic ratiocination says that a password is check in PLC, because it’s not necessary has a original project to go online and changes something.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

11/4/2005 2:26 AM	Rate (0)
沉默 Posts: 3 Rating: (0)	[quote user="Pegaia"] Logic ratiocination says that a password is check in PLC, because it’s not necessary has a original project to go online and changes something. I don't agree your opinion! Password are checked inSTEP7 editor ,after password data can passed form programmable controller to STEP7 editor while need password check. I track programmable controller and step7 editor Ethernet communications , data is encrypt! Do you know?
沉默 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on