Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S71200 Time Synchronisation with PC

Created by: Svetoslav Veselinov at: 5/28/2010 12:37 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/28/2010 12:37 PM	Rate (0)
Svetoslav Veselinov Posts: 21 Rating: (4)	Hello, Is it possible to use a PC as NTP server, so S71200 can synchonise with it automatically? If I change the time of the PC, the time of S71200 is changed too, for example? Thank you.
Svetoslav Veselinov Posts: 21 Rating: (4)
Suggestion To thank Quote Answer

5/28/2010 12:57 PM	Rate (0)
umencho Diamond Expert Joined: 3/21/2006 Last visit: 1/14/2025 Posts: 10239 Rating: (1182)	Hello Svetoslav Veselinov, Yes, it's possible. Look at this thread - Configure S7-1200 With External Time Server. There everything is clear about this issue. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

5/28/2010 1:00 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 1/17/2025 Posts: 4394 Rating: (1463)	Hi, if your PC is a NTP server, you can adjust the settings of the CPU (device config, Ethernet port of the CPU properties, Time Sycronization) to the IP of the PC. The Time of the CPU will follow the time of the PC.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

5/28/2010 1:15 PM	Rate (0)
Svetoslav Veselinov Posts: 21 Rating: (4)	Thank you, I guess I did not configure correctly my PC as NTP server, because the PLC cannot synchronise with it
Svetoslav Veselinov Posts: 21 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on