Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S71214C AI wiring

Created by: f.arslan at: 2/17/2011 3:05 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

2/17/2011 3:05 PM	Rate (0)
f.arslan Posts: 63 Rating: (0)	Hi, I have a s71214C CPU with 2 AI. And i wonder that how i can wiring the some analog device. there are 3 terminal in ai module. 2M, O channel,1 channel. And i want to AO wiring which code 6ES7 232-4HD30-0XB0. Best regard. F.arslan
f.arslan Posts: 63 Rating: (0)
Suggestion To thank Quote Answer

2/17/2011 4:42 PM	Rate (0)
MrPaiva Silver Member Joined: 6/29/2010 Last visit: 10/27/2022 Posts: 112 Rating: (63)	Hi f.arslan, Lookin this guide: http://support.automation.siemens.com/BR/view/en/36932465 At section A.2.3 and A.4.1 you can find the wiring of the 2 AI of the CPU and AO of the SM1232.

Suggestion To thank Quote Answer

10/19/2011 11:30 PM	Rate (0)
JairVargas Experienced Member Joined: 9/15/2010 Last visit: 11/26/2024 Posts: 80 Rating: (13)	Check this out. SM1232 AQ 2x14bit top (L+)------ +\| DC(thi is your power supply 24vdc )\|- ------- (M) bottom (0M)----- (to the other device's M - analog input) (0) ----- ( to your other device's AI analog input) (1M)---- (Same as above) (1)----- .... Good Wiring. Take care
	---------------------------- Jair Vargas T. Santa Cruz - Bolivia jair.dvt[at]gmail[dot]com whatsapp: +591 71336622 http://www.plc.com.bo
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users iSIEMENS

|

Share this page:

Share this page on...

Follow us on