Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

safe stop standard

Created by: Mehta at: 11/25/2011 9:31 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/25/2011 9:31 AM	Rate (0)
Mehta Posts: 80 Rating: (6)	Dear All, I am going to use two 800KW SLM (6SL3330-6TE41-7AA3) in parallel operation.Seven single motor module chasis(6SL3320-1TE35-0AA3) on DC bus.CU is 320-2 DP. I would like to use safe stop function without using any option(as standard).I read procedure given in manual but little confused. can any body explain how will be the connection and what parameter to be set exactly for this. Rgds Ashish
Mehta Posts: 80 Rating: (6)
Suggestion To thank Quote Answer

12/6/2011 9:28 AM	Rate (0)
KimBH Regular Member Joined: 12/1/2011 Last visit: 11/18/2021 Posts: 16 Rating: (0)	Dear Mehta, Which category or class safety standards(EN62061, EN ISO 13849-1, etc,)will you be observed? Regards,

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on