Sample program: S7 communication GET and PUT instructions

Hello Clelton;

Please read the complete thread you are posting to, before you nstart asking your question,

Many members have written how they established PUT/GET connections between TIA Portal CPUs and Step 7 v5.x projects.

For example, on page 1 of the thread, look at SIR's post.

On page 2, look at Gaine's reply...

Hope this hel;ps,

Daniel Chartier

Hello,

try this Example which part you can hope import to v14.

New question published by sharfras is split to a separate thread with the subject Get/Put instruction between three controllers .

Best regards
Jen_Moderator

 Denilson,

I get a error while opening this project in TIA portal V15

Denilson Pegaia

Hi,

the sample project was made with STEP 7 Basic V11 SP1 update 2. You need a equal or superior versionto open it.

I suggest you actualise your software to the current version SP2 upd4:
Service Pack 2for STEP 7 V11:
http://support.automation.siemens.com/BR/view/en/56750498
Service Pack 2for WinCC V11:
http://support.automation.siemens.com/BR/view/en/56897511

Updatesfor STEP7 / WinCC SP2 (use the update 4l):
http://support.automation.siemens.com/BR/view/en/58112582

Engr.Dawood

 Denilson,

I get a error while opening this project in TIA portal V15 

The answer stands in the error message.
With V15 you can't open a V11 project.