Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Save in file active G functions

Created by: makaveli at: 6/23/2010 8:49 AM (5 Replies)

Rating (2)

Thanks 0

6 Entries

6/23/2010 8:49 AM	Rate (0)
makaveli Posts: 259 Rating: (5)	Hi, I have one question: It is possible to save in text file all active G functions? You can see in jpg what I mean. Makaveli Attachment ActivGfunction.jpg (203 Downloads)
makaveli Posts: 259 Rating: (5)
Suggestion To thank Quote Answer

6/23/2010 10:59 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hi Makaveli.... It is not possible to save text file of active G functions don't have any saving option...... G functions parameters are entered in Channel MD parameter 20150 -GCODE_RESET_VALUE[0] to[69] The parameters values entered in 20150 only displays in G Functions screen. Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

6/23/2010 1:31 PM	Rate (0)
makaveli Posts: 259 Rating: (5)	I know about 20150 but im thinking that its possibile to have in some file information about actual active G function... But thx for replay. Makaveli
makaveli Posts: 259 Rating: (5)
Suggestion To thank Quote Answer

6/23/2010 2:28 PM	Rate (1)
pfuser Silver Member Joined: 9/18/2006 Last visit: 1/22/2025 Posts: 595 Rating: (64)	Hi. Number of active G function of G function group are displayed in DB2x. DbB208-Db2h.DbB271. Write down in a file using command WRITE (). You create the subroutine and to cause it at any moment. For example: DEF INT ERROR GROUP 1 IF ($P_GG [1] =1) WRITE (ERROR, "MyFile", "Gpoup1=G0") ENDIF IF ($P_GG [1] =2) WRITE (ERROR, "MyFile", "Group1=G1") ENDIF ............. GROUP 6 IF ($P_GG [6] =1) WRITE (ERROR, "MyFile", "Group6=G17") ENDIF IF ($P_GG [6] =2) WRITE (ERROR, "MyFile", "Group6=G18") ENDIF IF ($P_GG [6] =3) WRITE (ERROR, "MyFile", "Group6=G19") ENDIF .......... And so on for each group You delete a this file when it is necessary for you. Use instruction Delete. Best regards.
	Last edited by: pfuser at: 6/23/2010 2:37 PM
Suggestion To thank Quote Answer

6/24/2010 11:38 AM	Rate (0)
makaveli Posts: 259 Rating: (5)	Thanksfor your replay.
makaveli Posts: 259 Rating: (5)
Suggestion To thank Quote Answer

6/24/2010 1:27 PM	Rate (1)
pfuser Silver Member Joined: 9/18/2006 Last visit: 1/22/2025 Posts: 595 Rating: (64)	Hi. Typing error IF ($P_GG []) == This addition and specification. Best regards. Attachment P_GG-WRITE-DELETE-READ.pdf (202 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on